Specify the week you would like your pool opened. We cannot guarantee a SPECIFIC DAY, but will try our best to accommodate certain situations.
Please list any additional services required on your opening form.
We will email you to confirm receipt of your online Pool Opening form and to obtain the credit card information to be used for your pool opening , chemicals/products ordered, and any additional services requested.
Do not turn on the pool lights immediately after opening. The light housing must adapt and the condensation must evaporate. Turning the light on prematurely can cause the light to burn out.
Dichlors and Trichlors (granular chlorine) carry a very low pH level (6.8). If you've noticed throughout the season that you were having a problem with low pH, the amount of dry chlorine may be part of the problem. Remember, periods of low pH levels WILL cause equipment damage. You may need to change your usage by cutting back on the granular and replacing with liquid chlorine.
Please keep in mind that if you are using 3" chlorine tabs/granular stabilized chlorine, it is not necessary to keep your chlorine levels at 10ppm, 3-4ppm is sufficient.
Be careful when using calcium-based chlorine. Those of us who have well-water, normally have a high calcium level to begin with. If you add calcium-based chemicals to source water with high calcium, your pool water may turn cloudy (think calcium = milk). Calcium is a mineral which cannot be lowered with chemicals. You must drain and dilute in order to lower your levels; but, it is difficult to dilute with high calcium in your source water. Invevitably, you will end up flocking and using clarifiers to rectify your problem. The money you thought you were saving by purchasing a cheaper chemical will now be spent fixing the problem, and your relaxing pool-time will be lost as well.
With all chlorine-based chemicals, check your percentages to be sure the chemical content is higher than the inerts (inerts = filler added to make weight). Remember that the more filler you add to your pool, the higher the Total Dissolved Solids (TDS). As with calcium, TDS can create many problems such as chemicals locking up. The only solution for high TDS is to drain and dilute and, in most cases, starting from the beginning. Please be aware of what you are adding to your pool beforehand. Always have your stabilizer (Cynauric Acid) levels checked prior to starting regular maintenance. If levels are too high, it will cause a chemical lock-up.
If you run into a problem and need to shock your pool use liquid chlorine. This will not lock-up your chemicals; it works fast and if used correctly for your size pool, it will normally correct the problem. Always check your pH level first. If your pH is too high, it will cause the liquid to not work properly. You must use the correct amount of chlorine in order to shock the pool effectively. Under-cutting will ultimately be a waste of time and money. Once you've accomplished your clean-up balance and revert back to regular maintenance.